Kizz Vape
1 / 5
| Model | HX-300G | HX-600G |
|---|---|---|
| H2 Flow | 0--300ml/min Adjustable | 0--600ml/min Adjustable |
| O2 Flow | 0--150ml/min Adjustable | 0--300ml/min Adjustable |
| H2 Output Purity | 99.99% | |
| O2 Output Purity | 99.9% | |
| H2 Output Pressure | About 0.2MPa (Under Stable Pressure) | |
| Input Power (W/hr) | <150 | <250 |
| Power & Voltage | AC 220±10% or 110±10%, 50--60Hz | |
| Time Setting Range | Hour: 0--99hours, Minute: 0--60mins | |
| Water Consumption | Water tank capacity: 2L (normally 3 to 5 days between refilling water) | |
| Water Requirement | De-ionized water (Electrical resistivity > 2 Megohm/cm or conductivity less than 0.5us/cm) | |
| Equipment Weight | 9KGS | 11KGS |
| Machine Size | 33*29*39cm (L*W*H) | |
Uses advanced SPE/PEM technology to produce pure hydrogen gas safely without adding any catalyst. Only electrolyzes pure water.
Uses USA-imported Dupont brand proton exchange membrane.
Both sides of the membrane are coated with highly efficient platinum layers.
Electrodes utilize 100% Titanium 1 plates for enhanced durability.
Adjustable H2 flow rates (HX-300G: 0--300ml/min; HX-600G: 0--600ml/min).
Built-in runtime setting function ranging from 00:00 to 99:00 hours.
Portable ABS plastic case with rounded corners and a streamlined, smart design.
Touch screen buttons with automatic microcomputer controls to set H2 flow rate and time.
Electrical automatic control system for steady, low-fluctuation H2 output flow.
Simplistic design allows for easy water replacement and effortless operation.
Clear screen notifications alert users of normal and low water levels.
Super quiet sound levels allow the machine to be used seamlessly while sleeping.
The HX-300G and HX-600G inhalers produce high-purity hydrogen gas reaching upwards of 99.99%, ensuring a clean and safe inhalation session.
These machines utilize advanced SPE (Solid Polymer Electrolyte) / PEM (Proton Exchange Membrane) technology featuring a USA-imported Dupont membrane. It generates hydrogen via the electrolysis of pure water, without requiring any chemical catalysts.
The machine requires de-ionized water with an electrical resistivity greater than 2 Megohm/cm or electrical conductivity less than 0.5 us/cm to ensure the long life of the electrolysis cell.
The unit is equipped with a 2-liter water tank. Depending on daily usage, you will normally need to refill the water tank once every 3 to 5 days.
Yes, both settings are adjustable. You can customize the hydrogen flow (up to 300ml/min for HX-300G and 600ml/min for HX-600G) and configure the run timer (from 0 to 99 hours or 0 to 60 minutes) using the digital touch screen.
Yes, the machine runs quietly with low sound levels, allowing you to use it comfortably during sleep or rest periods without disruption.
